软管泵【水渠成型机】精工细作品质优良

首先我们先介绍一下软管泵，软管泵又称蠕动泵。为了泵体污染流体或流体污染泵体的危险性，整个泵的装置中只有软管与介质接触。在一般场合下，软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶，其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质，以及有机化学物质。内层是橡胶，而外层是天然橡胶或者是复合橡胶。

First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

 

BW系列软管泵用途广泛，适应能力强，具有可满足大、小口径钻机所需的各四挡流量，流量调节范围大，参数选择合理。可与XY-4岩心钻机和XY-5型钻机配套使用。可满足不同口径、不同孔深、不同地质岩心钻探的需要。<br />
活塞为碗形加尼龙靠背的自封式S型聚胺脂橡胶活塞，大大提高使用寿命。拉杆上设有五道防尘密封圈，以防止液力端的泥浆带入动力端和动力端润滑油滤。经多次生产试验证明，密封可靠，性能良好。致使齿轮延长使用寿命。<br />
进排水阀采用钢球。并在阀盖上设有减声橡胶垫，以减少冲击噪声。压力表采用BY-1型抗震压力表，寿命长。 结构紧凑，造型美观。 可拆性好，便于维修和搬迁。<br />！

软管泵工作原理：
一根内壁光滑，强度可靠的特制橡胶软管安装在泵体内部，通过一对压辊沿着软管旋转挤压，这样的 旋转使得介质往一个方向输送而不会倒流，软管在输送介质之后，由被压扁软管的自身弹性和侧导轮的强制下，软管恢复原状，此时，软管内产生高真空将介质再次吸入管腔，然后介质在随之而来的压辊挤压下从软管内排出，如此周而复始，介质不断的被吸入和排出。目前产品使用温度为≤100℃。根据用户需要可以开发使用温度在120℃的软管泵软管产品。
Working principle of hose pump:
A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without flowing back. After that, due to the elasticity of the flattened hose and the force of the side guide wheels, the hose returns to its original state. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again, and then the medium is pressed by the subsequent pressure roller. It is discharged from the hose under the squeeze, and so on and on, the medium is continuously sucked in and discharged. The current product temperature is ≤100 ℃. According to user needs, we can develop hose pump hose products with a temperature of 120 ℃.